English
Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
-
Dia1500mm 304 Stainless Steel Wire Mesh 100 For Cylinder Mould Of Paper Machine Cylinder mold Quantity: 1 sets Specification: Φ1500mm×3100mm×3800mm Description: stainless steel plate structure, plate thickness 1.5mm, cast iron spick, thickness 35-40mm.Polish after assembly, balance on installation, ...
-
The stainless steel roll wheel used in the felt and wire sensor Wire &felt rectifier also called rectifier, felt deviation controller, pneumatic automatic deviation corrector; Wire &felt deviation corrector; paper machine net blanket corrector; paper machine deviation corrector. It is a device that ...
-
The high quality pneumatic adjustor for the paper machine wire and felt Type:pneumatic Swing angle: ±5° Main structure: pneumatic tire, swing bearing seat, machine base, moving guide rail, transmission side bearing Auxiliary configuration: signal generating device, control box Material: Signal ...
-
Customized Paper Machine Parts cast iron felt /wire Pneumatic Corrector with rubber made air spring Including a base, a movable seat, a corrugated pneumatic tire, a guide rail bearing seat and an adjusting device, the guide rail bearing seat is slidably arranged on the movable seat, and the ...
-
Fourdrinier Type Craft Paper Making Machine Suction Box 304 S.S Body HDPE Faceboard 1. Structure: water leg type vacuum dewatering box (Wet suction box) is a low-vacuum (20-100 mm water column) box. It is fixed on a closed box by several panel strips with sharp front edges. Wide box surface. The ...
-
Paper Rewinding Machine HF Type Rubber Air Bag Rubber air springs are commonly known as pneumatic tires, corrugated pneumatic tires, and airbags. It is a precision-designed rubber fiber bellows. It does not provide force or support load by itself. Instead, it is filled with compressed air through an ...
-
Stainless steel screen plates / sieve plates of the waste paper pulp defibrator The sieve plate is an important filtering component on the pulper, and is generally made of stainless steel. 1. Good abrasion resistance and long service life, more than ten times that of metal screens, 3-5 times that of ...
-
5. Stianless steel impeller blade for the high consistency hydrapulper The impeller blade is an important filtering component on the pulper, and is generally made of cast stainless steel. 1. Good abrasion resistance and long service life, more than ten times that of metal screens, 3-5 times that of ...
You Might Be Interested In
